For contractors, commercial maintenance crews, and serious DIYers, the Element CommercialGRADE® Hose by Swan is a heavy-duty commercial water hose for frequent watering, equipment cleaning, and challenging outdoor projects. Its reinforced construction makes this commercial water hose a dependable choice for demanding professional and residential applications.
Heavyweight reinforcement at high-pressure areas adds strength, while a 500+ PSI burst strength helps resist bursting under substantial internal water pressure. Despite its rugged construction, this kink-resistant water hose remains flexible for easier handling around equipment, buildings, and other obstacles on busy worksites.
Swan’s patented Hose Armour® provides easy tightening at the faucet while helping prevent kinking at the water source. An oversized female coupling allows convenient attachment without tools, even in changing temperatures.
For added durability, extra-large aluminum couplings are crush-proof up to 4,000 PSI for strong, durable connections in demanding work environments. These rugged couplings make CommercialGRADE a practical choice for jobsites where hose connections may be exposed to heavy equipment and rough handling.
Available in a 5/8-inch diameter and 50- and 100-foot lengths, this flexible water hose offers options for a variety of commercial watering and cleaning applications. CommercialGRADE meets the lead-free standards of the Federal Safe Drinking Water Act and is backed by a limited lifetime warranty.
- Heavy-duty commercial water hose for professional and demanding residential watering and cleaning
- 500+ PSI burst strength helps resist bursting under substantial internal water pressure
- Heavyweight reinforcement at high-pressure areas adds strength
- Durable, flexible, kink-resistant construction for demanding outdoor use
- Patented Hose Armour® provides easy tightening at the faucet while helping prevent kinking at the water source
- Oversized female coupling allows easy faucet attachment without tools
- Extra-large aluminum crush-proof hose couplings withstand up to 4,000 PSI
- Meets lead-free standards under the Federal Safe Drinking Water Act
- Limited lifetime warranty
PSI: 500+
Kink-Resistance: High
Couplings: Extra-large, aluminum
Diameter: 5/8 in.
Lengths: 50 ft., 100 ft.
Made in the USA with global components
Weights:
- 5/8 in. x 50 ft. - 6.83 lbs.
- 5/8 in. x 100 ft. - 13.00 lbs.
How Do I Set Up My Hose?
- Set up your hose outside in temperatures above 70 degrees Fahrenheit to ensure maximum flexibility.
- Remove all packaging and ties.
- Check that the washer is properly seated in the coupling that attaches to the water source.
- Unwind the hose loosely in a circular motion before attaching it to the water source.
- Run water through the hose until the water exiting the hose is cool.
- Leave the hose laid out straight and allow it to heat up during the day.
- Wind the hose back accordingly.
How Do I Care for My Hose?
- Disconnect your hose from any standard metal faucet/spigot/hose bib and metal hose attachment and then reconnect at least twice per year to maintain a proper seal of the washer.
- Before reconnecting, loosen any corrosion evident on the hose coupling, standard metal faucet/spigot/hose bib and metal hose attachment caused by weather or environmental elements, which can cause the hose to fuse to the faucet and/or attachment.
- Always inspect the washer for proper placement and clear any buildup on the washer, coupling or faucet. This will help prevent potential leaks.
- Never overtighten coupling connections. Normally, tightening the coupling connections by hand is sufficient. Using a wrench to tighten the couplings might stop a leak in the short-term; however, it can damage the washer, compromising it for future connections.
- Do not pull and stretch the hose to reach a watering location beyond the length of the hose. When the hose starts to pull off the ground, you put excess force on its connections to the water source and any attachment such as a nozzle. This will not only damage your hose, it can also damage the plumbing that feeds the water source, as well as the attachment.
- Be careful not to drive over your hose. This can damage the hose and drastically reduce its life.
- If your hose is left in a shady spot, its exterior can be cleaned periodically with a mild soap-and-water solution to reduce the chance of organic growth. How Do I Store My Hose?
- Drain your hose when you’re not using it. Water left in a hose for extended periods of time can cause bacteria to form.
- Once the hose is drained, the male and female ends can be connected for storage. Washer replacement is suggested annually or after a prolonged connection.
- When coiling the hose for storage, try to do so without leaving any kinks in the hose. A hose stored with kinks will most likely kink in these same locations very easily once the hose is put back in use. Prolonged kinks create weak spots in the hose.
- Store the hose indoors when not in use.
- Flush your hose with water when put back in use.
Warnings
- Do not run hot water through your hose (unless your hose is rated for hot water).
- Do not run liquids other than water through your hose as they are only designed for use with water.
- Do not leave the hose under pressure when not in use. Heat or pressure can damage your hose and cause it to leak or burst.
- Our hoses are not intended for indoor use. Garden hoses are intended for use in residential and/or commercial water systems that have typical average water pressures up to approximately 100 PSI. Garden hoses should not be used for system pressures based upon burst rating.
- Note: If using a pressure washer, follow the manufacturer’s directions on which garden hose size is required. Only use the garden hose to connect the pressure washer to the water source. Ensure the hose is free from kinks to maintain an uninterrupted water flow to the pressure washer.
