Developed through a collaboration between Swan and John Deere, the John Deere Premium Duty Garden Hose is built for comfort and smooth control, balancing durability with easy handling for watering gardens, lawns, and landscaping.
Its soft, comfortable grip reduces hand strain, making longer watering sessions easier and more controlled. To minimize interruptions caused by kinks, this flexible garden hose features Swan’s exclusive TwistFREE™ Grip anti-kink technology. The hose rotates 360° within the grip at the male coupling, so coils and twists release naturally as you move, helping maintain the steady flow expected from a kink-free garden hose. At the water source, Swan’s patented Hose Armour® reinforces the female coupling to help prevent bending and kinking where hoses often fail.
Built from a durable hybrid compound, this heavy-duty garden hose remains flexible even in cold temperatures, so it’s easier to maneuver early in the season or during cooler weather. A 400 PSI burst strength delivers dependable performance for routine watering tasks while helping reduce the risk of leaks or blowouts.
Finished in iconic John Deere green and yellow and marked with the John Deere trademark, this durable garden hose is available as a 5/8-inch-diameter 50-ft. garden hose or 100-ft. garden hose and backed by a limited lifetime warranty for long-term reliability.
- Premium-duty John Deere–branded garden hose with a comfortable grip for easy watering of gardens, lawns, and landscaping
- 400 PSI burst strength
- Hybrid compound for exceptional durability and flexibility
- Features exclusive TwistFREE™ Grip anti-kink technology: Hose rotates 360° within the grip at the male coupling, effortlessly releasing coils and kinks as you move
- Remains flexible even in cold temperatures
- Patented Hose Armour® prevents kinks at the water source
- Features iconic John Deere colors and trademark
- Fits all standard faucets and most water accessories
- Limited lifetime warranty
PSI: 400
Diameter: 5/8 in.
Lengths: 50 ft., 100 ft.
Made in Thailand
Weight:
- 50 ft. - lbs.
- 100 ft. - lbs.
Note: If using a pressure washer, follow the manufacturer’s directions on which garden hose size is required. Only use the garden hose to connect the pressure washer to the water source. Ensure the hose is free from kinks to maintain an uninterrupted water flow to the pressure washer.
How Do I Set Up My Hose?
- Set up your hose outside in temperatures above 70 degrees Fahrenheit to ensure maximum flexibility.
- Remove all packaging and ties.
- Check that the washer is properly seated in the coupling that attaches to the water source.
- Unwind the hose loosely in a circular motion before attaching it to the water source.
- Run water through the hose until the water exiting the hose is cool.
- Leave the hose laid out straight and allow it to heat up during the day.
- Wind the hose back accordingly.
How Do I Care for My Hose?
- Disconnect your hose from any standard metal faucet/spigot/hose bib and metal hose attachment and then reconnect at least twice per year to maintain a proper seal of the washer.
- Before reconnecting, loosen any corrosion evident on the hose coupling, standard metal faucet/spigot/hose bib and metal hose attachment caused by weather or environmental elements, which can cause the hose to fuse to the faucet and/or attachment.
- Always inspect the washer for proper placement and clear any buildup on the washer, coupling or faucet. This will help prevent potential leaks.
- Never overtighten coupling connections. Normally, tightening the coupling connections by hand is sufficient. Using a wrench to tighten the couplings might stop a leak in the short-term; however, it can damage the washer, compromising it for future connections.
- Do not pull and stretch the hose to reach a watering location beyond the length of the hose. When the hose starts to pull off the ground, you put excess force on its connections to the water source and any attachment such as a nozzle. This will not only damage your hose, it can also damage the plumbing that feeds the water source, as well as the attachment.
- Be careful not to drive over your hose. This can damage the hose and drastically reduce its life.
- If your hose is left in a shady spot, its exterior can be cleaned periodically with a mild soap-and-water solution to reduce the chance of organic growth. How Do I Store My Hose?
- Drain your hose when you’re not using it. Water left in a hose for extended periods of time can cause bacteria to form.
- Once the hose is drained, the male and female ends can be connected for storage. Washer replacement is suggested annually or after a prolonged connection.
- When coiling the hose for storage, try to do so without leaving any kinks in the hose. A hose stored with kinks will most likely kink in these same locations very easily once the hose is put back in use. Prolonged kinks create weak spots in the hose.
- Store the hose indoors when not in use.
- Flush your hose with water when put back in use.
Warnings
- Do not run hot water through your hose (unless your hose is rated for hot water).
- Do not run liquids other than water through your hose as they are only designed for use with water.
- Do not leave the hose under pressure when not in use. Heat or pressure can damage your hose and cause it to leak or burst.
- Our hoses are not intended for indoor use. Garden hoses are intended for use in residential and/or commercial water systems that have typical average water pressures up to approximately 100 PSI. Garden hoses should not be used for system pressures based upon burst rating.